Formlabs Materials
Formlabs Resins
Engineering, dental, castable, and specialty resins for Form 4 and Form 4L. Every formulation is optimized for Formlabs' Low Force Display process.
Formlabs resins are engineered to deliver consistent mechanical properties, surface finish, and dimensional accuracy across every print. From rigid prototyping resins to biocompatible dental materials, there's a formulation for every application.
All Resins
8 formulations available
Standard Resin V4
Versatile, smooth-surface resin for concept models and general prototyping. Excellent detail resolution and easy post-processing.
- Tensile Strength: 65 MPa
- Elongation at Break: 6.2%
- Shore Hardness: 83D
- Colors: Grey, White, Black, Clear
Engineering Resin
High-impact, ABS-like resin for functional prototypes and end-use parts requiring toughness and durability.
- Tensile Strength: 46 MPa
- Impact Strength: 121 J/m
- Heat Deflection: 56°C
- Colors: Grey
Tough 2000 Resin
Simulates ABS with high stiffness and moderate elongation. Ideal for housings, enclosures, and snap-fit assemblies.
- Tensile Strength: 46 MPa
- Tensile Modulus: 2.2 GPa
- Elongation at Break: 45%
- Colors: Grey
Flexible 80A Resin
Shore 80A flexible resin for gaskets, grips, and wearable prototypes. Compresses and bends without tearing.
- Shore Hardness: 80A
- Elongation at Break: 160%
- Tear Strength: 11.6 kN/m
- Colors: Grey
Elastic 50A Resin
Ultra-soft Shore 50A resin for highly compressible parts, cushioning, and anatomical models.
- Shore Hardness: 50A
- Elongation at Break: 160%
- Compression Set: 5%
- Colors: Natural
High Temp Resin
Withstands temperatures up to 238°C HDT. Designed for molds, tooling, and parts exposed to elevated heat.
- HDT @ 0.45 MPa: 238°C
- Tensile Strength: 64 MPa
- Tensile Modulus: 3.6 GPa
- Colors: Tan
Castable Wax Resin
100% wax-filled resin for direct investment casting. Burns out cleanly with no ash residue — ideal for jewelry and small metal parts.
- Wax Content: 20%
- Ash Residue: <0.01%
- Surface Finish: Excellent
- Colors: Green
Dental LT Clear Resin
Biocompatible, long-term wear resin for splints, retainers, and occlusal guards. Class IIa medical device cleared.
- Biocompatibility: ISO 10993
- Flexural Strength: 98 MPa
- Flexural Modulus: 2.5 GPa
- Colors: Clear
Need help choosing the right resin?
Our application engineers can match the right material to your mechanical, thermal, or regulatory requirements.